How is it made?

UV DTF is created using Ultraviolet printers which have been around for a while mainly for larger scale works such as signs, posters and more. However recently it has been adapted to be able to print made to order prints for various surfaces including fabric! The actual process uses special inks that are formulated to dry extremely quick when under a UV light - a bit how when you have your nails done they ask you to sit for 5 minutes under a UV lamp, it's the same process - they print the design to the film and cure it quick under UV light.

Because of this process it means you can achieve more vibrant images/prints whilst not impacting durability.

Application:

When preparing your surface please ensure it is grease free and DO NOT use alcohol, we recommend just water, but ensure the surface its fully dried before application.
Peel design away from the provided backing
For complicated designs we recommend cutting into sections and applying
Press the transfer down onto your surface firstly rubbing hard with your thumb across all design parts, finally move over to using a squeegee and ensure a good contact with the wrap and squeegee the entire wrap, the longer or more pressing the better (this part is the most important, you need to achieve adhesion across the hole design).
Very slowly pull away the transfer sheet from the surface, if it seems to be stuck or not adhering correct please return back to step 3.

DISCLAIMER

Cup featured in the images are NOT included.
We are not responsible for wraps being applied incorrectly or if being applied to an alternative brand cup. Please ensure you are confident and have researched the application process correctly before attempting.
Sizes of cups will vary by brand, all our DTF prints have been designed against our own cups, should you wish to apply to cups other than our own some small tweaking may be required.
Physical DTF image colours may vary vs our mock up this is due to difference screens and resolutions.
We do not accept returns or exchanges for DTF prints, each designs 'print run' is manually tested by us before listing to the store.